HERLAN BDZ TRIMMING MACHINE D1453
Machine is for trimming, or trimming and beading of hollow bodies, like alu condenser cans, zinc-cans
Range of application
(according to manufacturer's brochure)
Number of strokes per min. max: 140
Untrimmed length: max. 120 mm
For trimmingof comb. trimming/beading of alu cans: 13-25 mm
of zinc cans: 25-45 mm
Aluminium cans: max. 0,4 mm
Zinc cans: max. 0,6 mm
Infeed height at infeed channel, adjustable: 690-750 mm
Motor power: 1,5 kW
Machine is equipped with:
Double spindle system for machining 2 cans simulataneously.
Can infeed is made via a special double infeed channel to the infeed drum which positions 2 cans in front of the working station.
The mechanically controlled push-on device pushes the cans onto the mandrels.
The cut is made by swivelling circular knife or by combined tool for cutting and beading.
After that the cans are blown back into the drum by controlled compressed air.
The waste is fed out separately.
The motor drive is equipped with an adjustable belt pulley.
The switch cabinet is mounted at the machine, central lubrication for all important bearings available, for each diameter an easily and quickly exchangeable drum is necessary.
For the automatic in-line operation together with an impact extrusion press, additional parts and adjusting works are necessary.
ALL PARAMETERS ARE WITHOUT ENGAGEMENT FROM OUR SIDE
Telefon: +49 (0) 7246 7004-0
Fax: +49 (0) 7246 7004-20
Too many enquiry attempts. Try again in 5 minutes.
Thank you for your enquiry.
You should receive a confirmation email with the enquiry details shortly.